ABchimie9030UV LED Resin

ABchimie9030UV LED is a one component resin, especially developed for PET plastic. It can be applied until 2mm deposit. Its curing is immediate with UV LED radiation.

CHARACTERISTICS
• Excellent adhesion on many substrates (including soft PET substract)
• Transparent resin
• No VOC
• Very fast curing under UV LED exposure
• High speed process, increase of the productivity.

DRYING TIMES AND CURING CONDITIONS
ABchimie9030UV LED cures with UV technology.
UV LED Curing : It is important to use the appropriate LED equipment, as well as the recommended
settings for the best properties of ABchimie9030UV LED:
LED lamp 395 nm
Distance LED light – coating : 0 to 10cm
Minimum UVA2 dose : 2300mJ/cm² (1mm)
Minimum UVA2 dose : 3300mJ/cm² (2mm)
A slight residual tack du to the oxygen in the air can appear. It disappears a few minutes after
passing under the lamp.
The UV dose given is a minimum to guarantee a good curing of varnish. A higher dose of UV
or a overexposure will not damaged the product.