Thermal strip gives great sharpness.
FT-802 can strip the insulation of AWG 38 wire with no nick.
Conventional wire stripper could make ragged edges of insulation or damage strands.
Due to the tweezers structure, the cutting edges are always aligned.
The blades can be securely fixed by making the frame with tweezers structure.
Even very fine AWG 38 can be stripped with standard blades.
Blades are replaceable and a handpiece can be saved.
No need to replace a handpiece when blades get worn out.
Blades can be easily replaced by using the hex-wrench (included in the unit) and the blade removal plate.
* The blades must be cool before replacement for safety.
Space saving by the integration of station and holder
Output setting by the unit of 5%. Easy to set optimum output level as per material.
User-friendly display
Status of a handpiece at glance on the display.
User-friendly design for reduction of stress during the work.
FT-802
◯A handpiece is correctly set in a holder.
◯Same as the output value
◯Ready to work immediately
◯Auto sleep function will activate after passing the set time.
◯Auto sleep function is running.
◯Save output value approximately by 50%
◯Reduce blade oxidation and load on heating elements
◯Time to activate auto sleep function can be set by the unit of 1 minute (up to 30 minutes).
Option blade can handle even very thick cables
HAKKO FT-8003 can strip insulation off thick leads that HAKKO FT-8002 could not.
HAKKO FT-8003
If cut with a knife blade
It is not recommended to use a knife blade for cable stripping due to the high risk of cutting in the conductor or fraying shield that can result in ruining the cable.
Station (with wire material indicator seal), Handpiece FT-8004 (with lead adjuster), Hexagon socket set screw (M2.5 x 2.5 [qty 2]), Hexagon wrench (1.27 mm), Power cord, Instruction manual
Blades are not included with this product. The desired blades should be purchased separately.
Spesifikasyonlar
| Model No |
FT-802 |
| Power consumption |
76W
|
・Station
| Output voltage |
AC 20V |
| Dimensions |
76 (W) × 159 (H) × 161 (D) mm |
| Weight |
1.6kg
|
・Wire Stripper (FT-8004)
| Power consumption |
72W (20V) |
| Cord length |
1.6m |
| Total length |
153mm |
| Weigh |
47g |
・Optional Wire Stripper (FT-8003)
| Power consumption |
46W (24V) |
| Cord length |
<2m |
| Tip to ground resistance |
<2Ω |
| Tip to ground potential |
1.3mV |
| Total length |
155mm |
| Weight |
27g |
* Length and weight for handpiece (w/o cord, blade)