Vacuum pump type desoldering tool with excellent thermal recovery
Digital display ensures easy and reliable temperature control
Sleep function that works with iron holder curbs the oxidation of nozzles
Even easier-to-use FM Series Desoldering Tool
Vacuum pump type desoldering tool
Excellent thermal recovery
·The integrated nozzle containing both heating element and sensor provides higher thermal recovery than conventional tips.
Soldering work is possible by replacing the handpiece.
Connectible handpieces:
- Desoldering handpiece (HAKKO FM-2024)
- Soldering iron (HAKKO FM-2027)
- N2 soldering iron (HAKKO FM-2026)
Selectable grip
Two-way use of gun type and straight type is available.
Easy maintenance
Filter pipe replacement:
- Disposable paper filter pipe
- Easy to dispose of paper and solder separately
Nozzle replacement:
- Safe to replace with nozzle remover
- Replaceable even before the end of nozzle has cooled down
Power save function
Sleep function:
When the handpiece is placed on the Iron Holder (FH200-01/FH200-02), the sleep function operates and decreases the unused tip temperature up to approximately 200°C , preventing the tip from being oxidized.
In addition, this function can relieve the loads applied to the tip due to the high-temperature settings required for lead-free soldering
* The connecting cable enables the iron holder and temperature controller to be activated.
Auto power shut-off function:
By connecting the iron holder (HAKKO FH-200) to the connecting cable, the auto power shut-off function is activated in the same manner as the sleep function.
- Selectable buzzer and alert ON/OFF setting Buzzer and alert sound generation upon error and when reaching the setting temperature can be selected. ON/OFF-settable buzzer sound
Model No. FM-204
Power consumption 120W
Temperature range FM-2024 : 350 to 450ºC
FM-2026/2027 : 200 to 450ºC
Temperature stability ±5ºC at idle temperature
・Station
Output voltage AC 24V
Vacuum generator Vacuum pump, double cylinder type
Vacuum pressure Max. 80kPa (600mmHg)
Suction flow 15L/min.
Dimensions 160(W)×120(H)×225(D)mm
Weight 3.7kg
・Desoldering Tool
Power consumption 70W (24V)
Nozzle to ground resistance <2Ω
Nozzle to ground potential <2mV
Heating element Composite heater
Cord length 1.2m
Total length 180mm (with Φ1.0mm nozzle)
Weight 65g (with Φ1.0mm nozzle)
* The suction flow is measured at the filter case suction port of station.
* Total length and weight (w/o cord, hose)