When necessary, the viscosity of HumiSeal®️ coatings can be adjusted according to application requirements using a compatible thinner listed in the table below. These are solvent blends formulated to maintain the original system balance when added to the appropriate coating type. Fully compliant with RoHS Directive 2002/95/EC.
Typical Physical Properties of HumiSeal®️ Thinners
| Thinner | 903 | 904 | 905 |
|---|
| Compatible HumiSeal Coatings |
1B51NS, 1B51NSLU |
1B51NS, 1B51NSLU |
1B51NS, 1B51NSLU |
|---|
| Relative Evaporating Rate (BuAc=1) |
>1 |
>1 |
3.00 |
|---|
| Specific Gravity |
0.78 ± 0.01 |
0.77 ± 0.03 |
0.77 ± 0.01 |
|---|
| Boiling Point (°C) |
115 |
110 |
101 |
|---|
| Vapor Pressure (mmHg) |
34.0 |
2.8 |
2.8 |
|---|
| Vapor Density (Air=1) |
3.7 |
4.0 |
4.0 |
|---|
| Flash Point (°C) TCC |
-1 |
-6 |
-6 |
|---|
VOC
(grams/litre) |
775 |
770 |
770 |
|---|
| Shelf Life, DOM |
24 Months |
|---|
| Color |
Clear |
|---|
Precautions for Use
HumiSeal®️ thinners are flammable, and the following standard safety precautions should be observed:
• Use only in well-ventilated areas
• Wear protective gloves and safety goggles
• In case of prolonged skin contact, wash with water
• In case of eye contact, rinse thoroughly with water and seek medical attention
• Avoid prolonged inhalation of vapors
• Unused portions of HumiSeal®️ products must be disposed of in strict accordance with applicable regulations
• For more detailed product information, refer to the Material Safety Data Sheet (MSDS/SDS)
